Automation Direct India is a leading dealer and distributor of Panasoni Converter in India. We distribute Panasonic Converter in Chennai, Bangalore, Pune, Mumbai, Ahmedabad, Hyderabad and Delhi.
PANASONIC CONVERTER
PANASONIC CONVERTER - AW-IF400 Protocol Converter
Highlights
High performance pan-tilt head (AW-PH400) can be controlled by controllers (AW-RP555, AW-RP655) by using this protocol converter (AW-IF400)
Outdoor pan-tilt head (AW-PH650) can be controlled by high performance controller (AW-RP400) by using this protocol converter (AW-IF400)
By using protocol converter AW-IF400, control distance between AW-PH400 & AW-RP400 can be extended up to 1 000 m
AC Adaptor AW-PS550 is required
Maximum control distance: 1,500 m
PANASONIC CONVERTER - KS1 Signal Converter
Specifications
Rated voltage - 24 V DC
Operating voltage range - 90 to 110%V of rated voltage (21.6 to 26.4 V DC)
Rush current - 12 A or less
Current consumption - 100 mA or less
Allowed momentary power off time - 10 ms
Fuse - Built-in type
Terminal screw - M2
Ambient temperature - 0 to 55°C
Ambient humidity - 30 to 85% RH (at 20°C, non-condensing)
Vibration resistance - 10 to 55 Hz, 1 cycle/min.: double amplitude of 0.75 mm, 1 hour on 3 axes
Shock resistance - 294 m/s2 or more, 5 times on 3 axes
Dimensions - 25 X 60 X 90
Weight - Approx. 80 g
PANASONIC CONVERTER - BY-HPE11KT Coaxial LAN Converter
Highlights
PoE (Power over Ethernet) ready
Use over long distances
High-speed transmission
No setup required
Features
PoE (Power over Ethernet) ready
The coaxial - LAN converter is compliant with PoE standards (IEEE 802.3 af), and contains a power supplying device. PoE can be used to supply power to Panasonic network cameras, which eliminates the need for installing power outlets for the cameras.
Use over long distances
The coaxial - LAN converter can be used for distances of up to 500 m (1,640 feet 12.7 cm)*1 for PoE connections, and 2 km (6,561 feet 20.32 cm for non-PoE connections. (When used with RG-6/U coaxial cable.)
High-speed transmission
The coaxial - LAN converter is capable of transmission speeds of 35 Mbps or over for TCP*2, and 45 Mbps or over for UDP connections. (When used with RG-6/U coaxial cable, and for distances under 2 km [6,561 feet 20.32 cm].)
No setup required Connections can be established by simply connecting the coaxial cable to the coaxial - LAN converter.
PANASONIC CONVERTER - DC/DC Converters
Highlights
The film capacitor has high noise absorbency and power supply line noise can be reduced due to low ESR.
The set's high reliability is achieved due to the film capacitor's low loss.
Improved reliability of set (With Ceramic X7R, sometimes there is a danger that the occurrence of cracks will generate malfunctions in the short mode. Cracks are not generated in film capacitors.)
Beneficial for reduced power supply line noise, etc., due to low ESR.
There is no problem with short product life caused by dry up, such as occurs with aluminum electrolysis, because electrolytes are not used
